TEAC TN-3B-A Pikap (üst kapak dahil)

TEAC TN-3B-A Pikap (üst kapak dahil)

TEAC TN-3B-A Pikap (üst kapak dahil)" BLACK"

Ürün yorumu yok
Stokta kalan son 2 ürün!
Süper Garanti Hizmetinden Faydalanmak İstiyorum 189 TL Detaya Git
Teslimat Bilgisi : Ücretsiz Kargo En geç 23 Ocak Perşembe günü kargoya verilir.

Gönderim süresi, ürünü satışa sunan Mağaza tarafından belirlenir.

4.850,00 TLKDV
DAHİL
Hemen AL Sepete Ekle
İş Bankası 50 TL MaxiPuan hediye! Detay
Fibabanka Alışveriş Kredisi Fırsatı Peşin fiyatına faizsiz masrafsız taksitli alışveriş fırsatı!
  • ORİJİNAL ÜRÜNE
    %100 DESTEK
  • ÖDEME
    KORUMA SİSTEMİ
  • İNTERNETTE
    GÜVENLİ ALIŞVERİŞ
  • Ürün Bilgileri

  • Taksit Seçenekleri

  • Ürün Yorumları (0)

  • Soru ve Cevap

Ürün Özellikleri

Marka Teac

Fiyat Takibi

Ayrıntılar

Teac TN-3B-A Pikap Çalar Teknik Bilgiler

 

* Kayışlı mekanizma.
* -1 33-1 / 3 ve 45 rpm destekleyen 2 farklı hız seçimi.
* Üst düzey tonearm üreticisi SAEC tarafından tasarlanan kol.
* MM tipi kartuşlarla uyumlu yerleşik PHONO EQ amplifikatör.
* PH PHONO EQ aşamasında kullanılan hi-fi sınıfı op-amp, NJM8080.
* Patinaj önleyici mekanizma.
* PC / Mac'e dijital arşivleme için USB dijital çıkış.
* PHONO / LINE analog çıkış (değiştirilebilir).
* Altın kaplama oksidasyona dayanıklı çıkış konektörleri.
* Önceden takılmış audio-technica AT-VM95E kartuş.
* Çok katmanlı sert lake kaplama, yüksek yoğunluklu MDF.
* Darbe emici yalıtım ayakları.
* GND terminali.
* HS RoHS uyumlu.
* 550 x 224 x 436 mm/ 17.3” x 8.8” x 17.2” 7.4kg /16.4 lbs..
 
 
Supplemental to New Product Information (SNPI)
 Key Features
 Belt-drive mechanism
 2-speed turntable supporting 33-1/3 and 45 rpm
 Knife-edge, pivot-point tonearm, designed by high-end tonearm manufacturer SAEC
 Aluminum die-cast platter
 Built-in PHONO EQ amplifier compatible with MM-type cartridges
 Hi-fi grade op-amp, NJM8080, used in PHONO EQ stage
 Anti-skating mechanism
 USB digital audio output for digitising records on a PC/Mac
 PHONO/LINE analog output (switchable)
 Gold-plated oxidation-resistant output connectors
 Pre-installed audio-technica AT-VM95E cartridge
 Rigid, high-density MDF plinth with multi-layered lacquer finish
 Shock-absorbing insulating feet
 GND terminal
 RoHS compliant
 Specifications
Turntable section
Type Belt-drive
Motor DC Motor
Rotation speed 33-1/3rpm, 45rpm
Wow and flutters less than 0.1%
Signal-to-Noise ratio 67dB (A-weighted,20KHz LPF)
Platter Die-cast aluminium, 30cm diameter
Tonearm section
Type Static-balanced, S-shape with knife-edge bearings
Effective tone-arm length 223mm
Anti-skating mechanism Supported
Stylus pressure range 0 to 5g
Compatible cartridge weight 3.0g to 12g
14g to 23g (incl. head-shell)
Cartridge section
Type VM-series (Moving Magnet-type)
Output voltage 4.0mV (1kHz, 5cm/sec.)
Stylus pressure range 1.8g to 2.2g (2.0g recommended)
Cartridge weight 6.1g
Head-shell weight 11g (incl. screws, nuts, and wires)
Stylus life approx. 300 hours (depending on conditions)
 
Analog outputs
Connectors RCA output x 1 pair (gold-plated)
Output Voltage
PHONO EQ THRU 4.0mV (1kHz, 5cm/sec.)
PHONO EQ ON 224mV (-13dBV)
USB section
Connector USB B-type (FULL-SPEED) x 1
(DC 5V 500mA supply required)
Sampling frequency 8k / 11.025k / 16 k/ 22.05k / 32k / 44.1k / 48kHz
Bit depth 16-bit
General
Power AC 100V to 240V, 50/60Hz
Power consumption less than 1.5W
Standby power less than 0.5W
GND terminal Fitted
Operating temperature range 5℃ to 35℃
Overall dimensions 420 x 117 x 356mm / 16.5” x 4.6” x 14.0” (dust cover closed)
420 x 381 x 402mm / 16.5” x 15.0” x 15.8” (dust cover opened)
Weight approx.5.0Kg / 11.0 lbs.
Included accessories Felt mat x1
EP adapter x1
Counter-weight x1
Headshell (with AT-VM95E pre-installed) x1
Platter x1
Dust cover x
Rubber feet for dust cover x2
Hinges x2
RCA audio cable x1
AC Adapter (GPE053A-V120050) x1
Owner’s manual (incl. Warranty) x1
 
 Product overview
The TN-3B is a stylish, sleek-looking belt-driven turntable with a built-in MM-type PHONO EQ amplifier and USB digital output.
It employs a new tonearm with knife-edge, pivot-point bearings, co-developed with SAEC, the high-end tonearm manufacturer, for superlative stability and resolution.
The belt-drive mechanism, meanwhile, helps mitigate any unwanted cogging effects (ie fine pulsing) from the operation of the motor, to ensure a precise and smooth platter rotation.
The TN-3B also employs a high-precision NJM8080 op-amp in its in-built Phono EQ amplifier, allowing the user to enjoy the sound of their vinyl records with low distortion and in high quality. In addition, a built-in Analog-to-Digital converter and USB port allow users to digitise their vinyl libraries on their PC/Mac.
The TN-3B delivers a natural and well-balanced sound quality and is quick and easy to set up and start enjoying. We believe it sets a new standard that will satisfy the needs of both audiophiles and ardent record collectors.
 Knife-edge, pivot-point tone-arm bearings
In collaboration with SAEC Corporation, a world-famous, high-end tonearm manufacturer, the TN-4D's tonearm employs a knife-edge, pivot-point bearing. Unlike the case for tonearms with conventional bearings, any fine vertical movements that take place in this tonearm actually help in delivering a more dynamic sound with excellent resolution. The S-shaped tonearm also employs a universal headshell fitting, allowing users to quickly and easily swap cartridges/headshells, and supports a wide range of cartridge weights (from 14 - 23g / 0.5 - 0.8 oz.)
 Precision anti-skating and stylus-pressure adjustment
The static-balanced, S-shape tone-arm is equipped with a counterweight for precise stylus-pressure adjustment, as well as an anti-skating mechanism for accurate tracking force adjustment, allowing the cartridge to accurately play any quality vinyl disc.
 Pre-installed VM-series cartridge
An audio-technica AT-VM95E cartridge with an elliptical-shaped stylus tip comes pre-installed on the headshell for convenience. After you’ve opened the box, set up the platter and mounted the headshell on the tonearm, you'll be ready to enjoy your records.
* Replacement styli should be available at the retail store where you purchased the unit, or via the TEAC On-line store. (TEAC On-line store is available in selected countries.)
* The VM-series cartridge is a MM (Moving Magnet) type design, and is compatible with all conventional MM-type phono EQ amplifiers.
 
 Built-in MM-type phono EQ amplifier
The TN-3B incorporates an MM-type phono EQ amplifier, allowing you to connect the turntable to a conventional amplifier/hi-fi system that lacks a PHONO input. A low distortion, hi-fi-grade op-amp, the NJM8080, is employed to boost the low-level signals from the phono cartridge up to LINE level.
 External belt-drive with aluminum die-cast platter
A belt-drive arrangement is employed in order to minimise any motor cogging effects by driving the outer rim of the platter (which has a larger diameter, mass and surface area).
 Luxurious, multi-layer lacquer paint finish
All internal components are mounted on a robust and high-density MDF plinth for rigidity and vibration-deadening. Thanks to its sleek and stylish design, the TN-3B looks at home in most domestic environments, creating the perfect setting for listening to vinyl records.
 USB digital output for digital archiving
A USB port on the back panel delivers CD-quality digital audio to your PC/Mac, allowing you to record/archive your analog library in a high quality, digital audio format. Once you have archived your vinyl to digital, it’s a simple matter to listen to them while out and about, via a smartphone/portable audio player, or in your car (by burning them onto a CD-R or transferring them to a memory card/stick).
And to ensure pristine signal transfer, gold-plated PHONO/LINE output terminals are employed to prevent analog audio signals from losing quality as a result of oxidation.
 33-1/3 and 45 rpm 2-speed turntable
The TN-3B supports both 33-1/3 and 45 rpm for LP and EP records. Our insistence on quality engineering can even be seen in the construction of the rotary control for start-up/speed selection, formed of machined aluminium.
 Insulating feet with excellent shock absorption
The insulating feet comprise a machined aluminium shell, topped with a rubber cushion that is fixed to the high-density MDF plinth. Thanks to their excellent shock absorption characteristics, the TN-3B is very resistant to acoustic feedback.
 Honeycomb patterned bottom panel
In order to achieve sleek cabinet design without compromising rigidity, the bottom panel is imprinted with a honeycomb pattern that minimises unwanted vibrations.

Teslimat Bilgileri

En geç 23 Ocak Perşembe günü kargoya verilir.

Satın alınan ürünler hafta içi saat 09:00-16:45 arası,cumartesi saat 09:00-12:00 arası kargoya teslim edilir. * İstanbul 1-2 gün İstanbul dışı 2-3 gün içinde adrese teslim. * Faturası ile birlikte Orjinal Kapalı Kutu Olarak tarafınıza gönderim yapılır. 16:45 den Önce Yapılacak Siparişleriniz Aynı Gün Kargolanmaktadır. Keyifli Alışverişler Dileriz. Ürünlerimiz resmi garantili ve faturalıdır. iade şartları: Siparişiniz kargo şirketi tarafından size ulaştığında, teslim almadan önce mutlaka dış pakette hasar kontrolü yapınız. Kutuda bir hasar olması durumunda ise ürünü teslim almayınız. Kargo görevlisine hasar tespit tutanağı hazırlaması yönünde uyarınız. Hasarlı paketi tutanak ile birlikte geri gönderiniz.

İade / Değişim Bilgileri

  • n11.com’dan satın aldığınız ürünler için cayma hakkınızı kullanabilirsiniz.* İade Sürecini Gör
  • Farklı bir model, beden veya renkle Ürün Değişimi yapabilirsiniz.
  • Ürünü mağazaya ücretsiz göndermek için mağazanın anlaşmalı kargo firmasını tercih edin.
  • Ürünle ilgili bilgi almak için Mağazaya Soru Sor alanından mağazayla iletişime geçebilirsiniz.

*Cayma Hakkı Kullanımı ve İade Şartları, 6502 Sayılı Tüketicinin Korunması Hakkında Kanun ve Mesafeli Sözleşmeler Yönetmeliği hükümlerine tabidir.

Satış Sonrası Servis

2 YIL GARANTİLİ

Ürünlerimiz resmi garantili ve faturalıdır.

Bireysel Kredi Kartları

Garanti Bankası
TAKSİT TUTARI TOPLAM TUTAR
3 1.616,67 TL 4.850,00 TL
6 - -
9 - -
12 - -
Ziraat Sanal Pos
TAKSİT TUTARI TOPLAM TUTAR
3 1.616,67 TL 4.850,00 TL
6 - -
9 - -
12 - -
Yapı Kredi
TAKSİT TUTARI TOPLAM TUTAR
3 1.616,67 TL 4.850,00 TL
6 - -
9 - -
12 - -
Türkiye İş Bankası
TAKSİT TUTARI TOPLAM TUTAR
3 1.616,67 TL 4.850,00 TL
6 - -
9 - -
12 - -
Finansbank
TAKSİT TUTARI TOPLAM TUTAR
3 1.616,67 TL 4.850,00 TL
6 - -
9 - -
12 - -
Akbank
TAKSİT TUTARI TOPLAM TUTAR
3 1.616,67 TL 4.850,00 TL
6 - -
9 - -
12 - -
Türkiye Halk Bankası
TAKSİT TUTARI TOPLAM TUTAR
3 1.616,67 TL 4.850,00 TL
6 - -
9 - -
12 - -
(PLS DO NOT ADD ANY BIN NUMBERS!) - Card Finans (Advantage Card) for just displaying Installment options.
TAKSİT TUTARI TOPLAM TUTAR
3 1.616,67 TL 4.850,00 TL
6 - -
9 - -
12 - -

Ticari Kredi Kartları

n11.com’dan satın aldığınız ürünle ilgili yorum yazıp görüşlerinizi paylaşabilirsiniz.

Ürünle ilgili daha fazla bilgiye mi ihtiyacınız var?

Mağazaya Sor